Connect to the latest product notifications

View updates and news here

Get the latest software updates, service notices and new product announcements from Honeywell Analytics.


2/8/2018
Regions affected:  Global

Further to the bulletin number 05-009 we are writing to remind you that the supply of all remaining spares and consumables for the Apex fixed gas transmitters will cease on 2nd December, 2019. At that time th

2/8/2018
Regions affected:  Europe

We are pleased to announce the release of the Firmware Update v1.3.4 for the BW Clip4 detector. It corrects a bug in the BW Clip4 that prevented some units from passing calibration.

Firmware v1.3.4 was

12/20/2017
Regions affected:  Global

To all Sensepoint XCL and XRL fixed gas detector customers. The purpose of this message is to alert you to a product safety issue Honeywell has discovered that could affect our new Sensepoint XCL and XRL fix

11/29/2017
Regions affected:  Europe

On 31 January 2017, the European Union (EU) Commission adopted the Directive 2017/164 establishing new indicative occupational exposure limit values for a list of chemical agents.  Extract of th

11/15/2017
We are pleased to announce the availability of Searchline Excel XTC. This special version of our long-established Searchline Excel line-of-sight IR gas detection system for the measurement of hydrocarbons has been specially developed for the Eura

7/31/2017
We are pleased to announce the release of version 1.0.2 firmware for our OELD Smart Junction Box product. This replaces the previous version of firmware, 1.0.1. This update mainly includes low-level changes to the internal functions of the firmwa

7/19/2017
We recently made some changes to remove the former Warranty Cards that are shipped with some of our products. We are now offering our distributors and end-users the possibility to use the warranty registration area of the Honeywell Analytics web

7/14/2017
Honeywell Analytics is pleased to announce the release of a new 301AP firmware revision. The new revision firmware (rev 1.08) contains tighter password protection and enhanced data processing. Enhanced password structure implemented to enable tig

7/14/2017
Effective immediately the Toxic 705 Sensors will be made obsolete. Impact to customers should be minimal as these sensors were last used with the Digi-Chem Transmitters to which the support of these transmitters ended November 30, 2011. Alternat

6/22/2017
We are delighted to announce the launch of our new Flame Detection Wizard and including it on our website. Our goal with this tool is to provide our customers an easier way to identify the best flame detector for their application based on a set

6/22/2017
The Honeywell BW Clip4 training and simulator app is now available in both Google Play & iTunes stores. You can just search "BW Clip4" in either of those stores and download the app to your phones. This app duplicates the experience of operat
6/9/2017
We have issued a safety advisory for the monitors listed above and are notifying all purchasers of the issue and of the proper steps to take to avoid a problem. We have learned that fresh-air calibration of an oxygen (O2) sensor that has failed i

5/24/2017
As Honeywell, we proactively investigate and improve our products to continuously ensure compliance with current and forthcoming directives. Following a review of our current product portfolio against the forthcoming requirements of “Restri

5/15/2017
The purpose of this notice is to inform you that we have identified a potential safety issue with the MicroRAE 4-gas portable monitor. We have learned that if the monitor suffers an impact in a specific manner, it could potentially lead to loss o

4/19/2017
At the end of 2nd quarter of 2017 Honeywell Analytics will discontinue all models of the IR148 due to changes in legislation with regard to RoHS and the new EMC standards. A replacement product should be available from us in 2018. Affected part

4/18/2017
We are happy to announce that Sensepoint with Junction Box will meet the more stringent RoHS and EMC requirements, which come into effect mid-2017. Consequently, the product will continue to be available for sale.

Please be reminded that o

4/18/2017
The ACM 150 FTIR Analyzer accessory item “Kit, Line Leak, 3/8T Check Valve” (PN 76-165-14594-00-A) was replaced by the PN 76-165-14594-00-1.  “10-point Sample Manifold includes Dust Filter” (PN 76-150-14393-04-B) was

4/18/2017
In January of 2016 Honeywell launched the MIDAS NP1 Pyrolyzer (part number: MIDAS-T-NP1), with the purpose of providing customers with a more reliable, compact, and cost-effective solution.

Following the success of that launch, Honeywell w

2/23/2017
Honeywell Analytics is pleased to announce the release of the Perkin Elmer (PKI) firmware update v2.0091 for the ACM150 and upgraded ACM100 units equipped with the PKI bench. There are several new features and improvements that h

2/22/2017
At Honeywell, we proactively investigate and improve our products to continuously ensure compliance with current and forthcoming directives. Following a review of System 57 against the forthcoming requirements of “Restriction of Hazardous S

2/9/2017
The purpose of this notice is to inform you that we have identified a potential safety issue with the MicroRAE gas monitor when it is used with an AutoRAE 2 Cradle. It is important that MicroRAE customers review this notice to understand the conc

1/19/2017
Please be advised that due to changes in legislation with regard to RoHS (Restriction of hazardous substances) directive and EMC (Electromagnetic compatibility) standard (EN 50270:2015), which will become effective on July 21st and October 19th,

1/10/2017
Honeywell Analytics has released an update for Fleet Manager II to introduce new functionalities. This version of Fleet Manager II includes following key enhancements:

Key Enhancements

8/18/2016
Regions Affected: EMEA

Please be advised that due to changes in legislation with regard to RoHS and EMC, all models of CM4 will be discontinued at the end of the 2nd quarter of 2017.

  • New CM4 units will be availabl