High Tech & Gov. Systems

Honeywell main product image
roll over image to zoom in

FS7 Flame Detector

Multi-spectral WideBand IR™, Near Band IR and Visible Band flame detectors are designed specifically for semiconductor Clean Room fire protection applications.
Features and Benefits
  • Unique two-stage fire detection response
  • Immune to false alarm sources
  • Detects hydrocarbon and non-hydrocarbon fires
Quick Specs
  • Field of view: 120° horizontal and vertical
  • Operating Voltage: 24 VDC nominal (18-28 VDC) - regulated
  • Operating temperature range: 32° to +158°F (0 to 70°C)
Need Assistance?
Call: 1.800.663.4164
Enter your name and phone number and a Honeywell representative will contact you shortly.
SSL Lock SSL Secure
Don't worry, we won't share your phone and email address. (privacy policy)

Product Overview

The FS7 Flame Detector provides an intelligent two-stage response to semiconductor wet bench fires:

Stage 1: Alert. This is the first-stage response to a small fire with a heat energy output of 3 kW (the equivalent of a 4-inch diameter polypropylene pool fire). This allows time for the fire to self-extinguish.

Stage 2: Alarm. If the fire does not self-extinguish, and grows to the Factory Mutual specified heat energy threshold of 13 kW (the equivalent of an 8-inch diameter polypropylene pool fire), the second-stage response is activated.

The FS7-2173 is used with the FS7-130-SX Controller or Control Panel FSWB. Controller and Control Panel supply power to detectors monitor the status of all detectors and communicate with the detectors via the digital RS-485 communication channel. FS7-2173 is supplied with a standard 20 ft. cable connector. Detectors are connected to the controller or control panel using the self-locking connectors and junction boxes. This allows for fast and easy connections eliminating wiring problems. Each detector can store up to six time and date stamped FirePics™ (pre-event multi-spectral sensor array data) in non-volatile memory. Controller and control panel can also store event history table in the non-volatile memory, which contains the time and date stamped alert, alarm and fault histories. FirePics™ and event histories can be retrieved from the controller or control panel.

The FS7-2173-2RP unitized model’s microprocessor, with digital signal processing algorithms, continuously monitors the circuitry, sensor’s built-in self-test and verifies proper operation. FS7-2173-2RP with discrete relay outputs is designed to operate as a stand-alone detector and interface with any approved fire alarm panel. The detector requires an external 24 VDC power source and is supplied with a standard 20 ft. pigtail cable. It can store up to six time and date stamped FirePics™ and 200 events in non-volatile memory. FirePics™ and event histories can be retrieved using a FS7 Interface Kit and the Windows-based PC software.

Additional Features and Benefits

  • Multi-Spectral digital electro-optical radiant energy infrared fire detector
  • Unique two-stage fire detection response
  • Immune to false alarm sources
  • NOT affected by absorbing smoke, gasses or chemical vapors
  • NOT sensitive to background radiant energy from electric heaters and ovens
  • Detects hydrocarbon and non-hydrocarbon fires
  • Rugged leak-proof, heat-sealed, acid-resistant, injection-molded polypropylene housing
  • Wide 120° field-of-view
  • Digital communication with RS-485 interface
  • FirePic™; time and date-stamped digital fire signatures
  • Built-in detector automatic self test
  • Unitzed model design for stand-alone operation

Electro-Optical Fire and Flame Detector - Fire Sentry FS7

Frequently Asked Questions

Have a question about the product features or warranty? Find the answers here.
We do not sell our products directly on our website but we would be happy to assist you with your gas detection needs.  On each product page you will see a red button on the right-hand side titled “HOW TO BUY”.  If you click on this button a form will appear which will go directly to one of our sales representatives once completed and submitted.  

You can also call one of our sales representatives directly.  Click here to go to the Contact Us page.  

There are two areas where you can access technical documents.  First, you can visit our Technical Library in the Support section of the website.  Here you will be able to access our entire catalog of documents and videos for all products – current and legacy products.  

You can also access the technical documents for each product on that product’s respective page within the website.    

Yes we do.  Check out our HA University training section to see what programs are available and sign up for any that you are interested in.  These courses are very informative and led by our expert engineers.  If you have any questions about training opportunities for yourself or your staff and would like to talk to a Honeywell representative, click here.

Check out the Product Inquiry page in the Contact Us section.  Here you’ll find sales contacts for each of our product lines and they can help you with any questions you may have from technical specifications to ordering information. 

Check out the Service & Repairs page in the Contact Us section.  Here you’ll find the contact information for our service centers in your region. 

There are several ways you can search for products on our website:

  • Click on the Products link in the main navigation to search by product lines.
  • Find products for a specific Industry or Application by clicking on the links in the main navigation bar at the top of the page.
  • Use our Gas Finder if you’re looking for a product that can detect a specific type of gas.
  • If you still can’t find the product you’re looking for, type the name of the product in the search bar at the top of the page.

Because we do not sell our products directly we cannot quote a specific price on our website.  Contact a sales representative through either the “HOW TO BUY” button on the product page or by calling them and they will be able to obtain pricing from local distributors in your area. 

Similar Products

Check out some of these similar products.
Fire Sentry SS2 Flame Detectors - Multi-spectrum flame detectors - Honeywell Analytics
These multi-spectrum flame detectors sense radiant energy in the ultraviolet (UV), visible and WideBand InfraredTM (IR) spectrum.
Applications: Flame Detection
Multi-spectrum Triple IR (IR/IR/IR/Visible) flame detector - Fire Sentry FS24X - Honeywell Analytics
Sophisticated software algorithms and dual microprocessors ensure that the FS24X has the highest fire detection performance combined with optimal false alarm rejection.
Applications: Flame DetectionAviationWelding
Fire Sentry FS20X - Electro optical detector - - Honeywell Analytics
Part of the FSX family of electro-optical flame detectors, the FS20X represents a quantum leap in integrating infrared and ultraviolet sensing technologies.
Applications: AviationFlame DetectionWelding
UV and UV/IR Electro-Optical Digital Fire and Flame Detectors - Fire Sentry SS4 - Honeywell Analytics
Electro-optical digital detectors represent leading edge UV and UV/IR technology.
Applications: Flame Detection
Fire Sentry FS System 10 and FS10-R - Honeywell Analytics
A high-speed microprocessor based fire detection and process control system specially designed for liquid and powder coating applications, the FS System 10™ quickly detects the presence of a flame, reacts by initiating a shutdown of the electrostatic finishing process in a matter of milliseconds; and effectively interrupts the fire before residues and wet paint films can ignite.
Applications: Flame DetectionPainting

Looking For More Information?

Check out these documents. If you can't find what you're looking for here, check out our Technical Resource library.