최신 제품 통지에 연결

여기서 업데이트와 뉴스를 볼 수 있습니다.

Honeywell Analytics의 최신 소프트웨어 업데이트, 서비스 알림 및 신제품 발표를 확인할 수 있습니다.


Page 1/ 2| 다음 
7/31/2017
We are pleased to announce the release of version 1.0.2 firmware for our OELD Smart Junction Box product. This replaces the previous version of firmware, 1.0.1. This update mainly includes low-level changes to the internal functions of the firmwa

7/19/2017
We recently made some changes to remove the former Warranty Cards that are shipped with some of our products. We are now offering our distributors and end-users the possibility to use the warranty registration area of the Honeywell Analytics web

7/14/2017
Honeywell Analytics is pleased to announce the release of a new 301AP firmware revision. The new revision firmware (rev 1.08) contains tighter password protection and enhanced data processing. Enhanced password structure implemented to enable tig

7/14/2017
Effective immediately the Toxic 705 Sensors will be made obsolete. Impact to customers should be minimal as these sensors were last used with the Digi-Chem Transmitters to which the support of these transmitters ended November 30, 2011. Alternat

6/22/2017
As stated in our previous communications the last time Global buy for System 57 was the 30th April 2017, this update confirms that no further system orders will be accepted. Consistent with our commitment to support our customer installations we

6/22/2017
We are delighted to announce the launch of our new Flame Detection Wizard and including it on our website. Our goal with this tool is to provide our customers an easier way to identify the best flame detector for their application based on a set

6/22/2017
The Honeywell BW Clip4 training and simulator app is now available in both Google Play & iTunes stores. You can just search "BW Clip4" in either of those stores and download the app to your phones. This app duplicates the experience of operat
6/9/2017
저희 기록에 따르면 귀하께서 위에 나열된 모니터 중 한 대 이상을 구매하신 것으로 파악되어 이 공지를 전달하는 바입니다. 우리는 이 모니터들에 대한 안전 권고사항을 발표했으며, 모든 구매자에게 해당 문제를 알리고 문제를 예방하기 위해 따라야 할 적절한 단계를 공지하고 있습니다. 우리는 위에서 언급한 모니터에서 산소(O2) 센서의 외기 교정 모니터가 펌웨어 이상으로 인해 제 기능을 하지 못하고 잘못된 판독값을 제공할 수 있다는 것을 발견했

5/15/2017
The purpose of this notice is to inform you that we have identified a potential safety issue with the MicroRAE 4-gas portable monitor. We have learned that if the monitor suffers an impact in a specific manner, it could potentially lead to loss o

4/18/2017
The ACM 150 FTIR Analyzer accessory item “Kit, Line Leak, 3/8T Check Valve” (PN 76-165-14594-00-A) was replaced by the PN 76-165-14594-00-1. "10-point Sample Manifold includes Dust Filter” (PN 76-150-14393-04-B) was replaced by