Device Management Software

Honeywell main product image
Desplazar imagen para ampliarla

Honeywell Sotera™ - Express

Honeywell Sotera™ – Express permite una gestión rápida y precisa de los detectores portátiles de gas y las estaciones de acoplamiento Honeywell RAE y BW en conjunto por primera vez. La tecnología de vanguardia simplifica la generación de informes y agiliza las tareas de administración, mientras que la interfaz fácil de usar y altamente intuitiva le permite extraer los datos de manera inteligente, eficaz y en menos tiempo. De modo que puede aumentar su productividad de manera gratuita.
Características y beneficios
  • La interfaz de usuario sencilla e intuitiva reduce la capacitación
  • La extracción mejorada de la información permite una mayor productividad 
  • Configuración más sencilla del dispositivo con grupos y plantillas de datos lógicos
  • Investigación inteligente de incidentes con generación centralizada de informes de eventos
  • Acceso controlado para mayor seguridad de datos
Especificaciones rápidas
  • Compatible con productos BW Technologies y RAE Systems de Honeywell. Consulte la sección de descripción general del producto a continuación para obtener más información sobre la compatibilidad del producto actual  
  • Funciona en un lugar de trabajo no conectado a Internet de modo que se puede acceder al software en cualquier momento y se reducen los problemas de privacidad de datos 
  • Menos mantenimiento a través de la gestión optimizada del firmware 
  • Gane tiempo con la descarga de datos con un clic que incluye todos los datos de los instrumentos

¿Necesita ayuda?
Llamar: + 55 11 3309 1133
Enter your name and phone number and a Honeywell representative will contact you shortly.
SSL Lock SSL Secure
Don't worry, we won't share your phone and email address. (privacy policy)

Descripción general del producto

Ya es hora de que alguien le ayude a organizarse ofreciéndole una solución que funcione. Si la gestión del cumplimiento de los detectores de gas es su responsabilidad, ya sabe que la recolección, el análisis y la generación de informes de esa información requieren mucho tiempo.

Honeywell Sotera™ – Express le permite gestionar su flota de detectores portátiles de gas y acoplamientos Honeywell con facilidad. Reduce la carga de la administración y simplifica el cumplimiento de modo que se pueda concentrar en garantizar la seguridad de las personas.

La interfaz fácil de usar y altamente intuitiva le permite extraer todos los datos necesarios de manera inteligente, eficaz y en menos tiempo. La tecnología de vanguardia garantiza que todos los datos se encuentren cifrados, lo que minimiza las amenazas a la privacidad.

Honeywell Sotera™ - Express se encuentra disponible para descargar en la pestaña de software a la derecha.

No vendemos nuestros productos directamente en el sitio web, pero estaremos encantados en ayudarlo con sus necesidades de detección de gas.  En cada página de productos, verá un botón rojo a la derecha que dice “CÓMO COMPRAR”. Si hace clic en este botón, aparecerá un formulario que lo dirigirá directamente a uno de nuestros representantes de ventas una vez que lo haya completado y enviado.

Además, puede llamar directamente a uno de nuestros representantes de ventas. Haga clic aquí para ir a la página Contáctenos. 

Existen dos áreas donde puede acceder a los documentos técnicos.  Primero, puede visitar nuestra Biblioteca técnica en la sección Asistencia técnica del sitio web.  Aquí, podrá acceder a nuestro catálogo completo de documentos y videos para todos los productos, actuales y tradicionales.

Además, puede acceder a los documentos técnicos de cada producto en la página correspondiente del producto en el sitio web.
Sí, ofrecemos.  Consulte la sección de capacitación HA University para ver qué programas están disponibles e inscribirse en alguno que le interese.  Estos cursos ofrecen mucha información y son dirigidos por ingenieros especialistas.  Si tiene alguna pregunta sobre las oportunidades de capacitación para usted o su personal y desea hablar con un representante de Honeywell, haga clic aquí.

Consulte la página Consultas sobre productos de la sección Contáctenos.  Aquí encontrará contactos de ventas para cada una de las líneas de productos y pueden ayudarlo con cualquier pregunta que pudiera tener, desde especificaciones técnicas hasta información para realizar un pedido.

Consulte la página Servicio técnico y reparaciones de la sección Contáctenos.  Aquí encontrará información de contacto sobre nuestros centros de servicio técnico en su región.

Existen varias maneras de buscar productos en nuestro sitio web:

  • Haga clic en el vínculo Productos, en la navegación principal, para buscar las líneas de productos.
  • Busque productos para una industria o aplicación específica haciendo clic en los vínculos de la barra de navegación principal, en la parte superior de la página.
  • Use el Buscador de gases si busca un producto que pueda detectar un tipo de gas específico.
  • Si aún no encuentra el producto que busca, escriba el nombre del producto en la barra de búsqueda, en la parte superior de la página.

Debido a que no vendemos productos en forma directa, no podemos cotizar un precio específico en nuestro sitio web.  Comuníquese con un representante de ventas mediante el botón “CÓMO COMPRAR”, en la página del producto, o llame y podrá obtener el precio de un distribuidor local de su zona.

Honeywell Sotera™– Express is offered free of charge to all Honeywell customers who purchase Honeywell Gas instruments.
Hardware:
  • CPU, 1.0 GHz or higher 
  • Color monitor (1366x768 or higher resolution or higher, 16-bit color) 
  • 2 GB RAM
  • 4 GB of free hard disk space 
  • USB port for instrument/dock connection 
  • LAN connection for network-connected docks
Software:
  • Microsoft Windows 7 SP1 (32 bit/ 64 bit) or Microsoft Windows 10 (64 bit)
  • .Net Framework v4.6.1 or above

Yes, Honeywell Sotera™ – Express has been designed to support both BW and RAE Systems instruments.

Honeywell Sotera™ - Express currently supports instrument connectivity through IntelliDoX and AutoRAE 2 for BW & RAE Systems instruments respectively.

For IntelliDoX, data transfer using the USB data download will be provided in future releases. Direct instrument connectivity without the docking station and MicroDock II support will also be provided in the future releases, as well.

Following is a list of currently supported instruments. Additional instrument support will be added in future releases. 
  • IntelliDoX 
  • BW Clip & BW Clip RT 
  • GasAlertMicroClip 
  • AutoRAE 2 
  • ToxiRAE Pro Family 
  • QRAE 3 
  • MultiRAE Family (Diffusion, Benzene, MX, Wing Tank model support in future releases) 
  • MicroRAE

The default username is administrator.  You are required to create a password for the administrator account when you log into the application for the first time.

No, Honeywell Sotera™ - Express does not require administrative privileges to the operating system.

Honeywell Sotera™ – Express has streamlined the tasks performed by Fleet Manager and greatly improves the overall user experience. However, it does not support user-defined fields and custom reporting features of Fleet Manager.

Honeywell Sotera™ - Express only supports the English language. Support for additional languages will be added in future releases.

For BW instruments connected through IntelliDoX, the instrument data should be downloaded for the instruments to show up in the Device Inventory. Make sure the filter option “Not Connected” is selected to view the instruments in the Device Inventory List for which data has been downloaded.

For RAE Systems instruments connected through the AutoRAE 2, the software should be able to communicate to the AutoRAE 2 for the instruments to show up in the Device Inventory list.

In addition, to view the RAE Systems instruments in the inventory after the AutoRAE 2 Docking Station is disconnected from the software, instrument data should be downloaded from the AutoRAE 2.

The filter option “Not Connected” should be selected to view RAE Systems instruments in the Device Inventory List for which data has been downloaded but are currently not connected to the software using AutoRAE 2.

IntelliDoX can connect to the software over the network. AutoRAE 2 can connect to the software either over the network or using direct USB connection.

First, make sure the software is set up to scan for the RAE Systems and/or BW docking stations by checking the appropriate box for “Allow Dock Discovery” under system Settings.

If the docking station is in a network path different than the software, the software may not be able to see the docking station.

In order for the software to see the Docking Station, add the Docking Station manually to the software using “Add AutoRAE Controller for manual detection” for AutoRAE 2 and “Add IntelliDoX for manual detection” for IntelliDoX under the system Settings menu option using the IP Address of the Docking Station

The software periodically scans the USB ports and network to check the online status of the docking station/instruments. However, the online status of the docking station might not be reflected right away in the software. If you are unable to see the docking station status online, you can click the Refresh button in the Device Inventory view to see the online status of the docking station.

Honeywell Sotera™ – Express uses digitally signed packages to update the device firmware as a security mechanism to verify the integrity of firmware update packages. As a result, it cannot use the same packages used by ProRAE Studio II and Fleet Manager II. Firmware packages designated for Honeywell Sotera™ – Express should only be used to update device firmware through Honeywell Sotera™ – Express.

The software downloads the data from the time it first communicates with the Docking Station. As a result, make sure you connect the docking station to the software before using to it manage the instruments. Any historical data prior to the first communication date with the software will not be downloaded from the Docking Station.
The software utilizes a smart download manager to incrementally download the data in order to optimize the download time. The software compares the existing downloaded data against the latest logged data and downloads only the incremental data since the last download.
In order to perform the Dock/ Device Configuration, the Dock/ Device needs to be connected to the computer and appear online to the software.
Currently, you can only perform one device action at a time. You must wait for the current operation to complete before performing another action. As a result, if you are performing a data download, you must wait for the data download to complete before performing a device configuration.
These operations will be supported in the near future when support for directly connected instruments is provided by the software because these operations are currently not supported through AutoRAE 2.
For both IntelliDoX and AutoRAE 2, the network parameters can be managed using the configuration options available on individual docking stations. Network configuration parameters cannot be updated using the software.
Honeywell Sotera™ - Express has a streamlined user interface to make it easier to manage configuration parameters. As a result, a common Updatable option is provided for all of the configuration parameters, including the sensor settings under the Settings tab.
You can navigate to the AutoRAE 2 details and edit the gas inlet configuration details for the attached gas cylinder in order to update the Lot Number of the gas cylinder.
Yes, you can update the Sensor Serial No. after installing a new sensor for the instruments that support this option under the Sensors tab for the corresponding instruments if they are currently online and connected to the software.

Device History provides a comprehensive view of all the data related to the lifecycle of the selected instrument. This includes test data for calibration and bump tests. This also includes the instrument event data along with the corresponding data logs.

All information related to device data logs, event logs and test logs is shown in the Device History, with the exception of IntelliDoX data logs and BW instrument test logs for bump and calibration operations performed outside of the IntelliDoX.

Make sure that you have downloaded the data from the docking station corresponding to the selected instrument before viewing the Device History. Once the data has been downloaded, you can view the history for the selected device.

Yes, you can export the instrument data log in csv (comma-separated value) format, which can be opened in Microsoft Excel for further analysis.

Due to compliance reasons, we do not allow data logs to be deleted once they have been downloaded to the software.

You can assign one or more of the following roles to a user:

Administrator – A user with the administrator role has access to all the features and functionality within the system.

Advanced User – A user with the advanced role can perform all the device operations. However, the user does not have access to user management.

Standard User – A user with the standard role can perform all device operations except device configuration and firmware update.

Worker – A user with the worker role has no access to the software. However, the user can be assigned/unassigned instruments.

You can assign a user the “Worker” role if you want to just assign instruments to the user.
You can reset your password by clicking the “Forgot Password” link on the Login Screen. Once you answer the security questions, you will be allowed to reset the password.

You can invoke the “Unlock Sotera Administrator Account” utility that is installed with the software to unlock the default administrator account.

For security purposes, you will be prompted to provide the Windows administrator User ID and password before you can unlock the Honeywell SoteraTM – Express administrator account.

If you want to temporarily suspend user access to the system, you can do that by deactivating the user account.

Descargue el firmware y los paquetes de software más recientes

Honeywell Sotera™ - Express

Permite la gestión rápida y precisa de los detectores portátiles de gas y las estaciones de acoplamiento Honeywell.

Honeywell Sotera™ – Express se encuentra disponible para descargar sin cargo. Basta con completar el formulario para descargar el software.

Hardware Requirements
CPU, 1.0 GHz or better.
Color monitor (at least 1366x768 resolution, 16-bit color).
2 GB RAM.
At least 4GB of free hard disk space.*
USB port for instrument/dock station connection.
LAN connection for network-connected dock stations.
Optional Internet connection (to access Product Registration Module).

Software Requirements
Operation Systems
Windows 7 32-bit SP1; Windows 7 64-bit SP1; Windows 10 64-bit.
Net Framework V4.6.1or above (can be installed with Honeywell Sotera™ - Express installation).

* Software installation only. Honeywell Sotera™ - Express may require significantly larger amounts of disk space to store device data and other software data.