Industrial Gas Systems

Honeywell main product image
roll over image to zoom in

Touchpoint 1 Controller

A controller for use with any one of the Sensepoint range of gas detectors providing 24-hour protection from flammable, toxic or Oxygen gas hazards
Features & Benefits
  • Simple push button operation
  • Unobtrusive slimline profile
  • Fully user programmable for scale, units and calibration
Quick Specs
  • Indoor use,  IP44 in accordance with EN60529:1992
  • Operating Temperature: -10°C to +40°C / 14°F to 104°F Intermittent to  +50°C / 122°F
Need Assistance?
Call: +91 (0)124 4752700
Enter your name and phone number and a Honeywell representative will contact you shortly.
SSL Lock SSL Secure
Don't worry, we won't share your phone and email address. (privacy policy)

Product Overview

The Touchpoint 1 Controller when used with any one of the Sensepoint range of gas detectors provides 24-hour protection from flammable, toxic or Oxygen gas hazards.  With executive outputs to shutdown process equipment or drive warning devices, the Touchpoint 1 is ideal for continuous monitoring of small remote sites where it is inappropriate or costly to monitor the area from a central location.

The shallow profile is designed for convenient location in corridors or reception areas where some larger controllers may be obtrusive.  A wall mounting bracket is included to which  the controller is attached, thereby simplifying installation. All cable entries are made via a gland plate at the bottom of the enclosure that includes pre-defined knockouts to minimise risk of damaging the connection terminals.  The hinged front cover latches open to enable full and unhindered access to the terminal compartment for installers.

AC and/or DC driven, the Touchpoint 1 includes built-in audiovisual alarms, two programmable alarm relays and a system fault relay as well as an isolated 4-20mA output proportional to the input from the field device. The system is fully user programmable via the ultra-clear backlit LCD and intuitive menu system. For example, relays may be configured as ‘non-latching’ (default is ‘latching’) so that 
outputs clear automatically on remote unmanned sites. Buttons used for 
configuration are hidden behind an access panel to prevent tampering.  A single 
button is available to all users on the front of the controller to perform a simple  self-test or to reset alarms if needed.

Event history is recorded as standard on all Touchpoint systems. Times and dates of alarms, power on or off, can be reviewed via the display to provide useful diagnostic information for service engineers and plant operators.

A Honeywell Analytics’ gas detection system is designed to offer a total solution for your gas monitoring needs. Manufactured to the highest quality standards, you are assured of being surrounded by gas detection equipment you can trust.

Additional Features and Benefits:

User Friendly
•  Self-contained, wall mounted enclosure
•  Ultra-clear backlit display
•  Built-in audiovisual alarms
•  Intuitive menu system
•  Simple push button operation


Easy to Install
•  Unobtrusive slimline profile
•  Mounting bracket included
•  Easy access to all terminals
•  Pre-formed knockouts in gland plate


Comprehensive Operation
•  3 wire mV bridge, 2 and 3 wire 4-20mA inputs
•  AC and/or DC operation
•  2 x alarm relays
•  1 x system fault relay
•  Repeated 4-20mA signal


Flexible Operation
•   Fully user programmable for scale, units and calibration
•   Relays configurable as energised, de-energised, latching or non-latching
•   Compatible with all Sensepoint  gas detectors


Gas detection technology can be complicated, and we always get questions about our products and services.

Here is a list of some of the more common questions.
We do not sell our products directly on our website but we would be happy to assist you with your gas detection needs.  On each product page you will see a red button on the right-hand side titled “HOW TO BUY”.  If you click on this button a form will appear which will go directly to one of our sales representatives once completed and submitted.  

You can also call one of our sales representatives directly.  Click here to go to the Contact Us page.  

There are two areas where you can access technical documents.  First, you can visit our Technical Library in the Support section of the website.  Here you will be able to access our entire catalog of documents and videos for all products – current and legacy products.  

You can also access the technical documents for each product on that product’s respective page within the website.    

Yes we do.  Check out our HA University training section to see what programs are available and sign up for any that you are interested in.  These courses are very informative and led by our expert engineers.  If you have any questions about training opportunities for yourself or your staff and would like to talk to a Honeywell representative, click here.

Check out the Product Inquiry page in the Contact Us section.  Here you’ll find sales contacts for each of our product lines and they can help you with any questions you may have from technical specifications to ordering information. 

Check out the Service & Repairs page in the Contact Us section.  Here you’ll find the contact information for our service centers in your region. 

There are several ways you can search for products on our website:

  • Click on the Products link in the main navigation to search by product lines.
  • Find products for a specific Industry or Application by clicking on the links in the main navigation bar at the top of the page.
  • Use our Gas Finder if you’re looking for a product that can detect a specific type of gas.
  • If you still can’t find the product you’re looking for, type the name of the product in the search bar at the top of the page.

Because we do not sell our products directly we cannot quote a specific price on our website.  Contact a sales representative through either the “HOW TO BUY” button on the product page or by calling them and they will be able to obtain pricing from local distributors in your area. 

Simply click on the arrow pointing down next to “LANGUAGE” in the red bar at the very top of the page.  A drop down list will appear and you can select any language from the list.

Similar Products

Here are additional products that may be of interest to you.
DIN rail mounted controller - Unipoint Controller - Honeywell Analytics
DIN rail mounted controller allows you to incorporate flammable, toxic or oxygen gas detection into control systems.
Applications: Combustible DetectionPower Generation

Additional Documents